 |
 |
|
Spacers Clear hole, non-threaded item.
-
Hex or round material.
-
Unplated metal, plated metal, or nylon.
-
Used as a bushing or where an unthreaded rod or threaded screw needs to pass
through.
|
Standoff Female/Female threaded part
-
Hex or round material.
-
Unplated, plated metal, or nylon
-
Used in applications where boards or other items need to be fastened to each
other.
-
Note: not all female/female standoffs are threaded through. Call Lyn-Tron to
confirm if the standoff you need is threaded through, or if it is a blind tap.
|
Standoff Male/ Female threaded part.
-
Hex or round material.
-
Unplated, plated metal, or nylon.
-
Most male lengths are standard sizes depending on the thread specified.
-
Female tap depths are also standard.
-
Call Lyn-Tron if different male and/or female dimensions are needed.
-
In male/female standoffs the male length is constant and the body length
changes.
|
Swage Spacers Clear hole swage part
-
Hex or round material
-
Unplated or plated metal
-
Used in applications calling for a roll over swage.
-
Not threaded and have a clear hole.
|
Swage Standoffs Threaded swage part.
-
Hex or round
-
Unplated or plated metal
-
Used in applications calling for a threaded part with a roll over swage.
|
Super Torque Spacer or Standoff
-
Knurl at the base of the shank that will drive into the board and allow better
fastening ability
-
See swage standoffs/spacers for further information
|
Jack Screw Male/Female part
-
3/16 hex material.
-
Unplated or plated metal
-
Unlike male/female standoffs, with a jackscrew the body remains the same length
and the male length changes.
|