Male Ball Studs
Male ball studs are a spring catch style fastener and ideal for applications where repeated engagement and disengagement are required. These are a popular choice for electrical panels, access doors, cabinet doors and other sheet metal enclosures. Different tensions with the same stud can be achieved depending on the Ball-Stud Speed Clip* chosen.
To ensure doors sit flush and snug against the mating panel, Ball studs come in a variety of standard body lengths. The length of the male thread is also offered in a variety of sizes to fit a wide range of door and panel thicknesses. Due to these options, Ball Studs serve as an easy connection in many different applications.
*Ball-Stud Speed Clips are not manufactured by Lyn-Tron.
How are Male Ball Studs Attached?
Male Ball Studs have an external thread and are installed with 6-32 threaded nut. For a more decorative finish, take a look at our range of thumb nuts. In addition to holding the Ball Stud in place, the thumb nut will also serve as a Pull Style Knob for your door.
To install, insert the male thread through a pre-drilled hole in the door or panel that is aligned with the Speed Clip. Pass the male thread through the hole and attach the nut on the opposite side. The ball stud should be facing the clip so it can engage when the door is shut. Misalignment resulting from a normal amount of manufacturing tolerances can be readily absorbed by the spring legs on the speed clip.
Selection Guide
We encourage you to explore our male ball stud offering below and find the right combination for your specific application. The listings are ordered by height and thread length and then material. We also manufacture custom male ball studs with precise measurements for applications requiring unique sizes.
More Questions
Lyn-Tron has been manufacturing electronic components and hardware for over 50 years! All Lyn-Tron electronic hardware is made in the USA and held to the highest quality standards.
Feel free to Contact us today if you have any questions about selecting a Ball Stud for your project, or if you would like to request custom parts or OEM designed hardware manufactured to your print.
0.421" Male Ball Studs
#6-32
| Part Number | Thread Length | Male Thread | Height | Center to Ball (A) | Panel Thickness | Details |
|---|---|---|---|---|---|---|
| SSB116-0.421-0.156 | 5/32" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.187 | 3/16" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.218 | 7/32" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.250 | 1/4" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.312 | 5/16" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.375 | 3/8" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.437 | 7/16" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.500 | 1/2" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.562 | 9/16" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
| SSB116-0.421-0.625 | 5/8" | #6-32 | 0.421" | 0.328" | 0.025 to 0.051 |
|
0.447" Male Ball Studs
#6-32
| Part Number | Thread Length | Male Thread | Height | Center to Ball (A) | Panel Thickness | Details |
|---|---|---|---|---|---|---|
| SSB116-0.447-0.156 | 5/32" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.187 | 3/16" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.218 | 7/32" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.250 | 1/4" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.312 | 5/16" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.375 | 3/8" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.437 | 7/16" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.500 | 1/2" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.562 | 9/16" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
| SSB116-0.447-0.625 | 5/8" | #6-32 | 0.447" | 0.354" | 0.052 to 0.078 |
|
0.473" Male Ball Studs
#6-32
| Part Number | Thread Length | Male Thread | Height | Center to Ball (A) | Panel Thickness | Details |
|---|---|---|---|---|---|---|
| SSB116-0.473-0.156 | 5/32" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.187 | 3/16" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.218 | 7/32" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.250 | 1/4" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.312 | 5/16" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.375 | 3/8" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.437 | 7/16" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.500 | 1/2" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.562 | 9/16" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
| SSB116-0.473-0.625 | 5/8" | #6-32 | 0.473" | 0.380" | 0.079 to 0.105 |
|
0.499" Male Ball Studs
#6-32
| Part Number | Thread Length | Male Thread | Height | Center to Ball (A) | Panel Thickness | Details |
|---|---|---|---|---|---|---|
| SSB116-0.499-0.156 | 5/32" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.187 | 3/16" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.218 | 7/32" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.250 | 1/4" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.312 | 5/16" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.375 | 3/8" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.437 | 7/16" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.500 | 1/2" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.562 | 9/16" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
| SSB116-0.499-0.625 | 5/8" | #6-32 | 0.499" | 0.406" | 0.106 to 0.132 |
|
0.525" Male Ball Studs
#6-32
| Part Number | Thread Length | Male Thread | Height | Center to Ball (A) | Panel Thickness | Details |
|---|---|---|---|---|---|---|
| SSB116-0.525-0.156 | 5/32" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.187 | 3/16" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.218 | 7/32" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.250 | 1/4" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.312 | 5/16" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.375 | 3/8" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.437 | 7/16" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.500 | 1/2" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.562 | 9/16" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
| SSB116-0.525-0.625 | 5/8" | #6-32 | 0.525" | 0.432" | 0.133 to 0.16 |
|
0.570" Male Ball Studs
#6-32
| Part Number | Thread Length | Male Thread | Height | Center to Ball (A) | Panel Thickness | Details |
|---|---|---|---|---|---|---|
| SSB116-0.570-0.156 | 5/32" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.187 | 3/16" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.218 | 7/32" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.250 | 1/4" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.312 | 5/16" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.375 | 3/8" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.437 | 7/16" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.500 | 1/2" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.562 | 9/16" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
| SSB116-0.570-0.625 | 5/8" | #6-32 | 0.570" | 0.477" | 0.209 to 0.235 |
|
0.625" Male Ball Studs
#6-32
| Part Number | Thread Length | Male Thread | Height | Center to Ball (A) | Panel Thickness | Details |
|---|---|---|---|---|---|---|
| SSB116-0.625-0.156 | 5/32" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.187 | 3/16" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.218 | 7/32" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.250 | 1/4" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.312 | 5/16" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.375 | 3/8" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.437 | 7/16" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.500 | 1/2" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.562 | 9/16" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|
| SSB116-0.625-0.625 | 5/8" | #6-32 | 0.625" | 0.532" | 0.23 to 0.256 |
|